# moldtraining.us/free-training/mold-ppe-worker-safety/: agent-readable view

PPE and Worker Safety for Mold Work: Respirators, Gloves, Eye Protection and OSHA Rules (free lesson 8 of 12)
type        free mini-training lesson with 8-question quiz (graded in-browser, nothing saved)
time        14 minutes
summary     Free lesson on protecting workers during mold work: N-95 vs. HEPA respirators and PAPRs, OSHA respiratory protection program requirements, gloves, goggles, clothing, hazard communication and other job hazards. 8-question quiz.

objectives
- Choose respiratory protection appropriate to the size and nature of mold work
- Explain the OSHA respiratory protection program requirements
- Select gloves, eye protection and protective clothing
- Recognize the other hazards on mold jobs

sections
- Respiratory protection
- The OSHA respiratory protection program
- Eyes, hands and body
- Other hazards on mold jobs
- Key takeaways

standards   29 CFR 1910.134, 1910.132, 1910.1200; OSHA General Duty Clause; EPA mold guidance

certificate course  https://moldtraining.us/mold-training-for-property-management/
note        Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.

Courses delivered by HAZWOPER OSHA Training, LLC, an IACET Accredited ProviderDelivered by an IACET Accredited Provider

Leer en espaƱol

Free Mini-Training · Lesson 8 of 12

PPE and Worker Safety for Mold Work: Respirators, Gloves, Eye Protection and OSHA Rules

There's no OSHA mold standard, but there are OSHA rules that apply to mold work. Learn how to choose PPE and what an employer must do before workers wear respirators.

  • 14 min
  • 8-question quiz
  • Intermediate
  • Free · no sign-up
On this page
  1. What you'll learn
  2. Respiratory protection
  3. The OSHA respiratory protection program
  4. Eyes, hands and body
  5. Other hazards on mold jobs
  6. Key takeaways
  7. Lesson quiz

In this lesson

What you'll learn

  • Choose respiratory protection appropriate to the size and nature of mold work
  • Explain the OSHA respiratory protection program requirements
  • Select gloves, eye protection and protective clothing
  • Recognize the other hazards on mold jobs

OSHA has no mold-specific standard or exposure limit. But mold work still falls under general OSHA requirements: the General Duty Clause, Respiratory Protection (29 CFR 1910.134), PPE (29 CFR 1910.132) and Hazard Communication (29 CFR 1910.1200) when chemicals are used. See OSHA mold regulations.

Respiratory protection

LevelRespiratorTypical use (EPA guidance)
MinimumN-95 filtering facepieceSmall areas, up to about 10 sq ft
LimitedHalf-face or full-face air-purifying respirator with HEPA (P100) cartridgesMedium jobs, about 10 to 100 sq ft, depending on dust
FullPowered air-purifying respirator (PAPR) with HEPA filtration, full faceLarge jobs or heavy disturbance where dust and spore levels are likely high

A dust mask that isn't NIOSH-approved isn't a respirator. An N-95 filters at least 95% of airborne particles when properly fitted. Half-face respirators don't protect the eyes, so add goggles.

The OSHA respiratory protection program

When respirators are required by the employer, OSHA's 1910.134 requires a written respiratory protection program, including:

  • Respirator selection based on the hazards.
  • A medical evaluation before fit testing or use.
  • Fit testing for tight-fitting respirators (including N-95s and half-face respirators) before first use and at least annually.
  • Training on use, limitations, inspection, maintenance and seal checks.
  • Cleaning, storage, maintenance and cartridge change schedules.
  • A program administrator and periodic program evaluation.

When an employee wears a filtering facepiece voluntarily (not required), the employer must still provide the information in Appendix D to 1910.134.

Eyes, hands and body

  • Eye protection: EPA recommends goggles without ventilation holes to keep spores and dust out. Safety glasses alone don't seal.
  • Gloves: long gloves that reach the middle of the forearm. For water and mild detergent, ordinary household rubber gloves work; with disinfectants or strong cleaners, use natural rubber, neoprene, nitrile, polyurethane or PVC gloves.
  • Clothing: disposable coveralls (limited PPE) or a full-body suit with head and foot coverings (full PPE) keep spores off street clothes and out of vehicles and homes.

Other hazards on mold jobs

  • Electrical: wet areas and damaged wiring. Shut off power before working in flooded areas.
  • Chemicals: cleaners and biocides need safety data sheets, labels and training under HazCom. Never mix bleach and ammonia.
  • Heat stress in suits and containment.
  • Falls from ladders when removing ceiling materials.
  • Sharp debris and lifting during demolition.
  • Lead and asbestos: older buildings may contain lead paint or asbestos in drywall compound, flooring or insulation. Test before demolition.
  • Sewage: Category 3 water brings bacteria and viruses; use appropriate PPE and hygiene.

Key takeaways

  • No OSHA mold standard, but the General Duty Clause, respiratory protection, PPE and HazCom rules apply.
  • Respirators scale with the job: N-95, then half- or full-face HEPA respirator, then PAPR.
  • Required respirator use means a written program, medical evaluation, annual fit testing and training.
  • Wear unvented goggles, long gloves suited to the chemicals, and disposable clothing.
  • Watch for electrical, chemical, heat, fall, lead and asbestos hazards.

Knowledge check

Lesson 8 quiz: 8 questions

Choose one answer for each question, then select Check my answers. Score 80% or higher to pass. Your answers stay in your browser and are never saved.

Question 1 Does OSHA have a mold-specific standard or exposure limit?
Question 2 Which respirator does EPA list as minimum protection for small mold cleanups?
Question 3 How often must tight-fitting respirators be fit tested under OSHA's respiratory protection standard?
Question 4 What must happen before an employee is fit tested or uses a required respirator?
Question 5 What type of eye protection does EPA recommend for mold cleanup?
Question 6 A worker has a full beard and needs respiratory protection. What option works?
Question 7 Which glove materials does EPA suggest when using disinfectants or strong cleaners?
Question 8 Why test for lead and asbestos before demolishing moldy materials in older buildings?

Sources and official references

Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.

Need Documented Mold Training?

Mold Awareness, Property Management and Mold Inspector courses. Certificate of completion. English & Spanish.