The short answer
Bleach, vinegar, hydrogen peroxide and disinfectant sprays can kill some mold on the surface of hard, non-porous materials. But EPA's guidance is that the goal of cleanup is to remove mold and fix the moisture, not just kill it, because dead mold can still cause allergic reactions. For most cleanups, EPA recommends scrubbing hard surfaces with detergent and water and discarding moldy porous materials.
Bleach, vinegar, peroxide and sprays compared
| Product | What it does | Limits |
|---|---|---|
| Chlorine bleach | Disinfects and whitens hard, non-porous surfaces | Doesn't remove growth inside porous materials like drywall and wood; harsh fumes; never mix with ammonia or acids |
| White vinegar | Mildly acidic household cleaner; may inhibit some surface molds | Not a substitute for removal; won't fix growth inside materials; never mix with bleach |
| Hydrogen peroxide (3%) | Oxidizer that can help clean and lighten surface growth | Same limits on porous materials; can bleach fabrics; don't mix with vinegar in a container |
| Disinfectant sprays (such as Lysol) | Some products list mold or mildew on the label | Follow label directions exactly; still need removal and moisture repair |
| Detergent and water | Physically removes mold from hard surfaces | EPA's recommended starting point for hard surfaces; dry thoroughly afterward |
Products that claim to kill mold are pesticides regulated by EPA, so their labels are the legal directions for use.
Why porous materials are different
On glass, metal, tile and sealed counters, mold sits on the surface and can be scrubbed off. On porous materials, such as drywall, ceiling tiles, insulation, carpet and unfinished wood, mold grows into the material. EPA notes that ceiling tiles and carpet may need to be thrown away because mold can grow into their empty spaces and be impossible to fully remove. Spraying the surface leaves growth behind, and it comes back when moisture returns.
Never mix these
- Bleach + ammonia (found in some glass and multi-surface cleaners): toxic chloramine gas. EPA specifically warns against this.
- Bleach + vinegar or other acids: releases chlorine gas.
- Hydrogen peroxide + vinegar mixed and stored together: forms a corrosive acid.
Ventilate any time you use disinfectants, wear gloves and goggles, and follow the label.
What to do instead
- Find and fix the water source.
- Protect yourself: N-95 respirator, gloves and goggles without vents.
- Scrub hard surfaces with detergent and water, then dry completely.
- Bag and discard moldy porous materials such as drywall, ceiling tiles and carpet pad.
- Dry the area and keep humidity below 60%, ideally 30 to 50%.
- For areas over about 10 square feet, contaminated water, or HVAC contamination, follow EPA's remediation guidance or hire a professional.
Learn the full method in the free mold cleanup methods lesson.
Sources and official references
Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.
