Showers create the perfect conditions for mold: daily water, warm temperatures, soap scum to feed on and often poor ventilation. Surface mold on tile and grout is usually an easy fix. Mold inside caulk, behind tile or in the wall is not.
Safety first
- Open a window or run the exhaust fan.
- Wear gloves and goggles; an N-95 respirator if you're scrubbing a larger area or are sensitive to mold.
- Use one cleaning product at a time and follow the label. Never mix bleach with ammonia-based cleaners or with vinegar.
Cleaning tile and grout
- Wet the surface and apply a bathroom cleaner or detergent solution.
- Scrub grout lines with a stiff brush and tile with a non-scratch pad.
- Rinse thoroughly and dry with a towel or squeegee.
- For stains that remain in grout, a product labeled for mold and mildew can help lighten them; follow the label and ventilate. EPA's guidance favors removal with detergent and water over routine biocide use. See does bleach kill mold?
- Once dry, consider sealing grout to slow future staining.
Moldy caulk: replace it
Mold that grows into silicone or latex caulk can't be scrubbed out. The fix is to cut out the old caulk, clean and fully dry the joint, and apply a fresh bead of mildew-resistant bathroom caulk. Let it cure fully before using the shower.
When it's more than surface mold
Call for a closer look when you see:
- Soft or crumbling grout, loose or hollow-sounding tiles, or stains on the ceiling below.
- Mold on the drywall outside the shower, or a musty odor that persists after cleaning.
- Growth that returns within days after cleaning.
These suggest water is getting behind the tile or a plumbing leak in the wall, which needs repair and possibly removal of wet materials. Follow EPA's 10 square foot guidance.
Keeping it from coming back
- Run the exhaust fan during showers and for a while afterward; make sure it vents outdoors and actually moves air.
- Squeegee walls and glass after showering.
- Keep indoor humidity below 60%, ideally 30 to 50%.
- Wash or replace shower curtains and bath mats regularly.
- Fix dripping faucets and showerheads.
- Re-caulk and re-grout as part of unit turnovers.
Sources and official references
Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.
