EPA's Mold Remediation in Schools and Commercial Buildings scales protection to the total area of mold growth. Add up every wall, ceiling and floor area with visible growth, then check the conditions that apply.
The EPA thresholds
| Area | Containment | PPE |
|---|---|---|
| About 10 sq ft or less | Generally none | Minimum: N-95, gloves, unvented goggles |
| About 10 to 100 sq ft | Limited | Limited or full |
| Over 100 sq ft | Full | Full where dust and spores are likely high |
How to measure
- Measure the visible growth on each surface: length times width, in feet.
- Add separate patches together; ten 1-square-foot spots is 10 square feet.
- Expect more than you can see: growth often extends behind drywall and under flooring. Re-check the level once materials are opened up.
Professional judgment still applies
EPA's guidance isn't a regulation and the numbers aren't sharp cutoffs. Heavy growth, demolition dust, HVAC involvement, contaminated water and sensitive occupants all justify more protection. State licensing rules and employer programs may also apply. Learn more in EPA remediation guidelines.
Sources and official references
Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.
