A
- Air movers
- High-velocity fans that blow air across wet surfaces to speed evaporation during water damage drying.
- Air sampling
- Collecting a measured volume of air to count and identify mold spores, usually with an outdoor control sample for comparison. See sampling.
- Air scrubber
- A portable fan unit with a HEPA filter that cleans air in a work area. Ducted outside the containment, it creates negative air pressure.
- Allergen
- A substance that causes an allergic reaction. Mold spores and fragments, even from dead mold, can be allergens.
B
- Biocide
- A chemical that kills living organisms, such as chlorine bleach. EPA doesn't recommend biocides as a routine practice in mold cleanup. See does bleach kill mold.
- Black mold
- A common name, usually for Stachybotrys chartarum, though many molds look black. See black mold facts.
- Bulk sample
- A piece of material removed for laboratory analysis of mold growth.
C
- Category 1, 2 and 3 water
- IICRC S500 classes of water by contamination: clean (Category 1), significantly contaminated (Category 2) and grossly contaminated such as sewage or floodwater (Category 3).
- Clearance (post-remediation verification)
- Inspection, and sometimes sampling, after remediation to confirm the work area is clean and dry before rebuilding.
- Condensation
- Water that forms when humid air touches a surface colder than its dew point.
- Containment
- Barriers, usually polyethylene sheeting, that isolate a mold work area. EPA describes limited and full containment. See EPA guidelines.
- Cross-contamination
- Spreading mold spores or debris from a work area to clean areas.
D
- Decontamination chamber (airlock)
- An enclosed space between containment and clean areas where workers remove contaminated PPE. Part of full containment.
- Dehumidifier
- Equipment that removes water vapor from air, used for drying and humidity control.
- Dew point
- The temperature at which air becomes saturated and water condenses. See the dew point calculator.
E
- Efflorescence
- White, chalky mineral salt left on masonry or concrete as water evaporates. It's not mold, but it signals moisture.
- EMLAP
- The AIHA Laboratory Accreditation Programs' Environmental Microbiology Laboratory Accreditation Program, which accredits labs that analyze mold samples.
- Encapsulant
- A coating applied to cleaned surfaces, such as framing, after remediation. It isn't a substitute for removing mold.
F
- Fit test
- A test that checks whether a tight-fitting respirator seals to the wearer's face. OSHA requires it before use and at least annually when respirators are required.
- Full containment
- EPA's containment for areas over about 100 square feet: double polyethylene barriers with a decontamination chamber or airlock and negative pressure.
- Fungi
- The kingdom of organisms that includes molds, yeasts and mushrooms.
H
- HEPA filter
- High-efficiency particulate air filter, which removes at least 99.97% of particles 0.3 microns in size. Used in vacuums, air scrubbers and respirator cartridges.
- HEPA vacuum
- A vacuum with a HEPA filter, used for final cleanup in mold remediation (EPA Method 3).
- Hygrometer
- An instrument that measures relative humidity.
- Hyphae
- The thread-like filaments that make up the body of a mold colony.
I
- IAC2
- The International Association of Certified Indoor Air Consultants, which publishes mold inspection standards of practice.
- IICRC S500 / S520
- Industry standards from the Institute of Inspection, Cleaning and Restoration Certification for water damage restoration (S500) and mold remediation (S520).
- Infrared (thermal) camera
- A camera that shows surface temperature differences, used to find possible wet areas, which are then confirmed with a moisture meter.
L
- Limited containment
- EPA's containment for about 10 to 100 square feet: a single layer of 6-mil fire-retardant polyethylene with a slit entry and flap, sealed openings and negative pressure.
M
- Mildew
- An informal name for some molds that grow flat on surfaces, such as shower grout and window sills.
- Moisture mapping
- Measuring and recording moisture readings across an area to define the extent of wet materials.
- Moisture meter
- An instrument that measures moisture content in building materials such as drywall and wood.
- Mold
- A type of fungus that grows as hyphae and spreads by airborne spores. See mold basics.
- Mold remediation
- The controlled process of removing mold growth and contaminated materials and correcting the moisture source. See the remediation process.
- Musty odor
- An earthy, damp smell produced by actively growing mold; a key sign of hidden mold.
- Mycotoxins
- Compounds produced by some molds, including Stachybotrys, under certain conditions.
N
- N-95 respirator
- A NIOSH-approved filtering facepiece respirator that filters at least 95% of airborne particles. EPA's minimum respiratory protection for mold cleanup.
- Negative air pressure
- Keeping a work area at lower pressure than surrounding areas, using exhaust through HEPA filters, so air flows into containment rather than out.
- Non-porous material
- A material that doesn't absorb water, such as metal, glass and hard plastic. Mold can usually be cleaned from it.
P
- PAPR
- Powered air-purifying respirator, which uses a blower to push filtered air into a facepiece or hood. EPA's full PPE level for large jobs.
- Porous material
- A material that absorbs water, such as drywall, ceiling tile, insulation and carpet. Moldy porous materials usually need to be discarded.
R
- Relative humidity (RH)
- Water vapor in air compared with the maximum the air can hold at that temperature. EPA recommends indoor RH below 60%, ideally 30 to 50%.
- Remediation scope
- A written plan listing areas, materials to remove, containment, PPE, methods, drying targets and verification.
S
- Settle plate
- A petri dish left open to catch spores. Because spores are everywhere, it doesn't show whether a building has a mold problem.
- Spore
- The microscopic reproductive unit that molds release into the air.
- Spore trap
- An air sampling cassette that captures spores for microscopic counting and identification.
- Stachybotrys chartarum
- A greenish-black mold that grows on wet, cellulose-rich materials such as drywall paper and wood; often called "black mold."
- Surface sample (tape lift, swab)
- A sample collected from a surface to confirm whether a stain or film is mold.
V
- Vapor retarder
- A material, such as polyethylene sheeting over crawl space soil, that slows moisture movement.
W
- Water activity
- A measure of water available to microorganisms in a material. Mold needs enough available water to grow.
Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.
