# moldtraining.us/free-training/practice-test/: agent-readable view

Mold Awareness and Remediation Practice Test
summary     Free mold awareness practice test: 20 random questions from a bank built on EPA and CDC mold guidance, with instant scoring and explanations. Nothing is saved.
format      20 random questions per attempt from a 96-question bank; graded in-browser; nothing saved

question bank
Q: What is mold?
A: A type of fungus that grows as fine threads and reproduces by spores
Q: Which factor needed for mold growth is most controllable indoors?
A: Moisture
Q: How soon can mold begin to grow on damp materials?
A: Within about 24 to 48 hours
Q: Is it possible to remove all mold spores from a building?
A: No. Spores are present in nearly all indoor and outdoor air, so the goal is to prevent growth by controlling moisture
Q: You find mold on a wall. What does that tell you?
A: There is a moisture problem that must be found and fixed
Q: What does CDC say about identifying the type of mold before cleanup?
A: You don't need to know the type of mold; remove it regardless and fix the moisture
Q: Which of these can serve as food for mold indoors?
A: Drywall paper, wood, ceiling tiles, carpet and household dust
Q: How is mildew best described?
A: An informal name for some molds that grow flat on surfaces, which also signal excess moisture
Q: What indoor relative humidity range does EPA recommend?
A: Below 60%, ideally 30% to 50%
Q: What is the dew point?
A: The temperature at which air becomes saturated and water condenses
Q: Why does mold often grow on cold exterior walls behind furniture?
A: The wall surface is colder than the dew point of the room air and air doesn't circulate, so condensation forms
Q: What happens to relative humidity when air cools without adding or removing moisture?
A: It rises
Q: Which is a moisture control for bathrooms?
A: An exhaust fan ducted to the outdoors
Q: Within what time should water-damaged materials be dried to prevent mold?
A: 24 to 48 hours
Q: Which tool tells you whether drywall is wet?
A: A moisture meter
Q: A crawl space has a bare dirt floor and musty odors. Which control helps?
A: Installing a vapor retarder over the soil and managing ventilation or conditioning
Q: According to CDC, how might exposure to damp and moldy environments affect people?
A: It may cause a variety of effects, such as stuffy nose, wheezing and itchy eyes, or none at all
Q: Which group is at higher risk of serious lung infections from some molds?
A: Immune-compromised people and those with chronic lung disease
Q: Which health effect did the 2004 Institute of Medicine review link to indoor mold and dampness?
A: Asthma symptoms in people with asthma
Q: Can mold irritate people who aren't allergic to it?
A: Yes. Mold exposure can irritate the eyes, skin, nose, throat and lungs of non-allergic people
Q: A tenant says mold is making them sick. What should the property team do?
A: Take the report seriously, suggest they consult a health professional, investigate the moisture and growth, and document everything
Q: Why do CDC and EPA advise the same response for every type of indoor mold?
A: Because health effects vary by person and there are no standards for safe levels, so all growth should be removed and moisture fixed
Q: How should sensitive occupants be protected during a larger cleanup?
A: Consider temporary relocation and use containment to keep spores and dust from spreading
Q: Who should diagnose whether a person's symptoms are caused by mold?
A: A health professional
Q: Which is one of the most reliable signs of mold when none is visible?
A: A persistent musty, earthy odor
Q: White, chalky salt deposits on a basement concrete wall that dissolve in water are most likely:
A: Efflorescence, a mineral deposit
Q: What does the color of mold tell you?
A: Not much; color doesn't reliably identify species or health risk
Q: What does a thermal (infrared) camera actually detect?
A: Surface temperature differences that may indicate wet areas, which must be confirmed with a moisture meter
Q: Which is a common location for hidden mold?
A: Behind drywall on exterior walls or around plumbing
Q: Why should you be careful when removing wallpaper over suspected heavy mold?
A: It can release a large burst of spores, so PPE and possibly containment are needed
Q: Which tool measures whether drywall is wet?
A: Moisture meter
Q: Peeling paint, bubbling wallpaper and soft drywall are clues to:
A: Moisture problems and possible hidden mold
Q: Within what time does EPA recommend drying water-damaged materials to prevent mold growth?
A: 24 to 48 hours
Q: According to EPA Table 1, what should be done with wet ceiling tiles?
A: Discard and replace them
Q: When may wet drywall be dried in place under EPA guidance?
A: When there's no obvious swelling and the seams are intact
Q: A sewer line backs up into a basement. What does EPA say about using fans?
A: Don't use fans until you've confirmed the water is clean or sanitary, because they can spread contaminants
Q: Which IICRC category describes sewage backup or rising floodwater?
A: Category 3
Q: What does EPA recommend for wet fiberglass insulation?
A: Discard and replace it
Q: Carpet was soaked with clean water 72 hours ago and now smells musty. Which guidance applies?
A: Remediation guidance, because materials were wet more than 48 hours and mold may have grown
Q: What confirms that materials are dry enough to rebuild?
A: Moisture meter readings back to normal dry levels for the material
Q: Under EPA guidance, what size mold area can most people usually clean up themselves?
A: Less than about 10 square feet, roughly a 3 by 3 foot patch
Q: What containment does EPA's guide generally recommend for about 10 to 100 square feet of mold?
A: Limited containment
Q: What is the minimum PPE EPA recommends for mold cleanup?
A: An N-95 respirator, gloves and eye protection
Q: What describes limited containment?
A: A single layer of 6-mil fire-retardant polyethylene with a slit entry and flap, vents sealed, under negative pressure
Q: What distinguishes full containment from limited containment?
A: Double layers of polyethylene and a decontamination chamber or airlock
Q: Which EPA cleanup method is used for final cleanup after materials are dried and removed?
A: Method 3: HEPA vacuum
Q: What should happen to an HVAC system suspected of mold contamination during cleanup?
A: Don't run it, and seal vents in the work area
Q: Which is one of EPA's signs that cleanup is complete?
A: The moisture problem is fixed and visible mold and moldy odors are gone
Q: Why isn't killing mold enough?
A: Dead mold can still cause allergic reactions, so it must be removed
Q: What is the usual approach for moldy ceiling tiles?
A: Discard them, because mold can grow into porous materials and may be impossible to fully remove
Q: How should mold be cleaned from a non-porous surface like metal or glass?
A: Scrub with detergent and water, then dry completely
Q: What is EPA's position on using bleach during mold cleanup?
A: Biocides like bleach aren't recommended as a routine practice, though professional judgment may call for them in some cases
Q: Why must bleach never be mixed with ammonia-containing cleaners?
A: It produces toxic fumes
Q: Which vacuum should be used for mold cleanup?
A: A HEPA vacuum
Q: Why should moldy materials be lightly misted before removal?
A: To reduce the amount of spores that become airborne
Q: Can you paint over mold to fix it?
A: No. Clean, dry and fix the moisture first; paint over mold will likely peel and growth continues
Q: Does OSHA have a mold-specific standard or exposure limit?
A: No. Mold work is covered by general requirements such as the General Duty Clause, respiratory protection, PPE and HazCom
Q: Which respirator does EPA list as minimum protection for small mold cleanups?
A: An N-95 respirator
Q: How often must tight-fitting respirators be fit tested under OSHA's respiratory protection standard?
A: Before first use and at least annually
Q: What must happen before an employee is fit tested or uses a required respirator?
A: A medical evaluation
Q: What type of eye protection does EPA recommend for mold cleanup?
A: Goggles without ventilation holes
Q: A worker has a full beard and needs respiratory protection. What option works?
A: A loose-fitting PAPR hood, or shaving where the seal meets the face
Q: Which glove materials does EPA suggest when using disinfectants or strong cleaners?
A: Natural rubber, neoprene, nitrile, polyurethane or PVC
Q: Why test for lead and asbestos before demolishing moldy materials in older buildings?
A: Older materials may contain lead paint or asbestos, which demolition can release
Q: What does EPA say about sampling when mold growth is visible?
A: In most cases, sampling is unnecessary
Q: Are there EPA or federal limits for mold spores in indoor air?
A: No. No EPA or other federal limits have been set for mold or mold spores
Q: Why does CDC not recommend routine mold testing?
A: Reactions vary by person, sampling can be expensive, and there are no standards for acceptable mold levels
Q: Why is an outdoor control sample collected with indoor air samples?
A: To compare indoor spore levels and types against outdoor background levels
Q: Which sample type is best for confirming whether a surface stain is mold?
A: Tape lift or swab surface sample
Q: When can surface sampling be useful according to EPA?
A: To help confirm that an area has been adequately cleaned or remediated
Q: Why are open petri dish "settle plate" kits a poor way to evaluate a home?
A: Spores are everywhere, so mold will grow on almost any plate, and the kits don't measure concentration
Q: Which lab credential is commonly used for environmental mold analysis?
A: AIHA Laboratory Accreditation Programs' EMLAP
Q: What is the primary focus of a mold inspection?
A: Finding the moisture source and the extent of damage
Q: Why start with an exterior walkthrough?
A: Many interior moisture problems start outside, at roofs, drainage, siding and windows
Q: What should be done after a thermal camera shows a cool spot on a wall?
A: Confirm with a moisture meter
Q: Which item belongs in a mold inspection report?
A: Findings by location with photos, moisture readings and approximate area of visible growth
Q: According to EPA, when growth is visible, sampling is:
A: Usually unnecessary
Q: Why does the client interview matter?
A: It reveals leak history, occupant sensitivities, the client's goals and the scope of the inspection
Q: Which HVAC component commonly holds water that supports mold?
A: The condensate drip pan
Q: Why do many professionals separate mold inspection from remediation?
A: To avoid a conflict of interest when the person scoping the job would also profit from it; some states require separation
Q: What should be recorded when a resident reports mold?
A: Date, unit, what and where they observed it, duration, known leaks, contact details and photos
Q: A resident reports water pouring through a ceiling. What priority is this?
A: Emergency: stop the water and make it safe the same day
Q: What should be fixed first in any mold complaint?
A: The moisture source
Q: How should staff respond if a resident says mold is making them sick?
A: Take it seriously, avoid diagnosing, suggest a health professional, and respond promptly to the building issue
Q: Which guidance helps decide whether maintenance staff can handle a cleanup?
A: EPA's guidance that areas under about 10 square feet can usually be handled with basic protection, while larger areas need EPA's full guidance or a professional
Q: Why is documentation important?
A: It shows a reasonable, timely response and supports the building's records if a dispute arises
Q: Which is a reasonable tenant responsibility for moisture control?
A: Using exhaust fans and reporting leaks promptly
Q: Are landlord mold obligations the same in every state?
A: No. They vary by state and city, so confirm local requirements
Q: What is the core of any mold prevention program?
A: Moisture control
Q: Which HVAC task helps prevent mold?
A: Cleaning drip pans and keeping condensate lines draining
Q: Where should bathroom exhaust fans vent?
A: To the outdoors
Q: What indoor humidity range should a prevention program target?
A: 30 to 50%, and below 60%
Q: Why can an oversized air conditioner contribute to mold?
A: It can cool the space quickly without running long enough to remove humidity
Q: Why are unit turnovers a good time for prevention checks?
A: The unit is empty, so hidden areas behind appliances, under sinks and around tubs are easy to inspect and repair
Q: What MERV rating does EPA suggest for HVAC filters?
A: About MERV 8, changed regularly
Q: Which practice keeps crawl spaces drier?
A: Covering exposed soil with a vapor retarder and directing water away from the foundation

Courses delivered by HAZWOPER OSHA Training, LLC, an IACET Accredited ProviderDelivered by an IACET Accredited Provider

Leer en español

Free Practice Test

Mold Awareness and Remediation Practice Test

Test what you know about moisture, health effects, inspection, water damage, EPA remediation guidelines, PPE and sampling, with an explanation for every answer.

  • 20 random questions per attempt
  • 96-question bank
  • Instant scoring
  • Nothing is saved

This practice test pulls questions from all 12 free lessons. It is a study aid, not an exam for a certificate or license, and your answers are never stored.

Knowledge check

Mold practice test: 20 random questions

Each attempt draws 20 questions from the 96-question bank built from our free lessons. Score 80% or higher to pass. Select New random test for a fresh set. Nothing you answer is saved or sent.

Question 1 What is mold?
Question 2 Which factor needed for mold growth is most controllable indoors?
Question 3 How soon can mold begin to grow on damp materials?
Question 4 Is it possible to remove all mold spores from a building?
Question 5 You find mold on a wall. What does that tell you?
Question 6 What does CDC say about identifying the type of mold before cleanup?
Question 7 Which of these can serve as food for mold indoors?
Question 8 How is mildew best described?
Question 9 What indoor relative humidity range does EPA recommend?
Question 10 What is the dew point?
Question 11 Why does mold often grow on cold exterior walls behind furniture?
Question 12 What happens to relative humidity when air cools without adding or removing moisture?
Question 13 Which is a moisture control for bathrooms?
Question 14 Within what time should water-damaged materials be dried to prevent mold?
Question 15 Which tool tells you whether drywall is wet?
Question 16 A crawl space has a bare dirt floor and musty odors. Which control helps?
Question 17 According to CDC, how might exposure to damp and moldy environments affect people?
Question 18 Which group is at higher risk of serious lung infections from some molds?
Question 19 Which health effect did the 2004 Institute of Medicine review link to indoor mold and dampness?
Question 20 Can mold irritate people who aren't allergic to it?
Question 21 A tenant says mold is making them sick. What should the property team do?
Question 22 Why do CDC and EPA advise the same response for every type of indoor mold?
Question 23 How should sensitive occupants be protected during a larger cleanup?
Question 24 Who should diagnose whether a person's symptoms are caused by mold?
Question 25 Which is one of the most reliable signs of mold when none is visible?
Question 26 White, chalky salt deposits on a basement concrete wall that dissolve in water are most likely:
Question 27 What does the color of mold tell you?
Question 28 What does a thermal (infrared) camera actually detect?
Question 29 Which is a common location for hidden mold?
Question 30 Why should you be careful when removing wallpaper over suspected heavy mold?
Question 31 Which tool measures whether drywall is wet?
Question 32 Peeling paint, bubbling wallpaper and soft drywall are clues to:
Question 33 Within what time does EPA recommend drying water-damaged materials to prevent mold growth?
Question 34 According to EPA Table 1, what should be done with wet ceiling tiles?
Question 35 When may wet drywall be dried in place under EPA guidance?
Question 36 A sewer line backs up into a basement. What does EPA say about using fans?
Question 37 Which IICRC category describes sewage backup or rising floodwater?
Question 38 What does EPA recommend for wet fiberglass insulation?
Question 39 Carpet was soaked with clean water 72 hours ago and now smells musty. Which guidance applies?
Question 40 What confirms that materials are dry enough to rebuild?
Question 41 Under EPA guidance, what size mold area can most people usually clean up themselves?
Question 42 What containment does EPA's guide generally recommend for about 10 to 100 square feet of mold?
Question 43 What is the minimum PPE EPA recommends for mold cleanup?
Question 44 What describes limited containment?
Question 45 What distinguishes full containment from limited containment?
Question 46 Which EPA cleanup method is used for final cleanup after materials are dried and removed?
Question 47 What should happen to an HVAC system suspected of mold contamination during cleanup?
Question 48 Which is one of EPA's signs that cleanup is complete?
Question 49 Why isn't killing mold enough?
Question 50 What is the usual approach for moldy ceiling tiles?
Question 51 How should mold be cleaned from a non-porous surface like metal or glass?
Question 52 What is EPA's position on using bleach during mold cleanup?
Question 53 Why must bleach never be mixed with ammonia-containing cleaners?
Question 54 Which vacuum should be used for mold cleanup?
Question 55 Why should moldy materials be lightly misted before removal?
Question 56 Can you paint over mold to fix it?
Question 57 Does OSHA have a mold-specific standard or exposure limit?
Question 58 Which respirator does EPA list as minimum protection for small mold cleanups?
Question 59 How often must tight-fitting respirators be fit tested under OSHA's respiratory protection standard?
Question 60 What must happen before an employee is fit tested or uses a required respirator?
Question 61 What type of eye protection does EPA recommend for mold cleanup?
Question 62 A worker has a full beard and needs respiratory protection. What option works?
Question 63 Which glove materials does EPA suggest when using disinfectants or strong cleaners?
Question 64 Why test for lead and asbestos before demolishing moldy materials in older buildings?
Question 65 What does EPA say about sampling when mold growth is visible?
Question 66 Are there EPA or federal limits for mold spores in indoor air?
Question 67 Why does CDC not recommend routine mold testing?
Question 68 Why is an outdoor control sample collected with indoor air samples?
Question 69 Which sample type is best for confirming whether a surface stain is mold?
Question 70 When can surface sampling be useful according to EPA?
Question 71 Why are open petri dish "settle plate" kits a poor way to evaluate a home?
Question 72 Which lab credential is commonly used for environmental mold analysis?
Question 73 What is the primary focus of a mold inspection?
Question 74 Why start with an exterior walkthrough?
Question 75 What should be done after a thermal camera shows a cool spot on a wall?
Question 76 Which item belongs in a mold inspection report?
Question 77 According to EPA, when growth is visible, sampling is:
Question 78 Why does the client interview matter?
Question 79 Which HVAC component commonly holds water that supports mold?
Question 80 Why do many professionals separate mold inspection from remediation?
Question 81 What should be recorded when a resident reports mold?
Question 82 A resident reports water pouring through a ceiling. What priority is this?
Question 83 What should be fixed first in any mold complaint?
Question 84 How should staff respond if a resident says mold is making them sick?
Question 85 Which guidance helps decide whether maintenance staff can handle a cleanup?
Question 86 Why is documentation important?
Question 87 Which is a reasonable tenant responsibility for moisture control?
Question 88 Are landlord mold obligations the same in every state?
Question 89 What is the core of any mold prevention program?
Question 90 Which HVAC task helps prevent mold?
Question 91 Where should bathroom exhaust fans vent?
Question 92 What indoor humidity range should a prevention program target?
Question 93 Why can an oversized air conditioner contribute to mold?
Question 94 Why are unit turnovers a good time for prevention checks?
Question 95 What MERV rating does EPA suggest for HVAC filters?
Question 96 Which practice keeps crawl spaces drier?

Last reviewed: October 25, 2026 · Free general education based on EPA and CDC mold guidance and OSHA worker-safety principles. It is not an EPA or OSHA certification or a state mold license, not medical or legal advice, and it does not issue a certificate. Nothing you enter on this page is saved or sent.

Need Documented Mold Training?

Mold Awareness, Property Management and Mold Inspector courses. Certificate of completion. English & Spanish.